|
|
|
|
|
|
|
|
|
|
|
|
|
|
Level is lightweight, very durable with a flat base for surface leveling. Accurate with a clear 360 degree vial.
|
High impact ABS plastic. Easy to read vial. Durable open hooks to slide on the line. Allows you to level and layout string and can be used on chalk reels to snap a level line.
|
Designed to provide multi-directional leveling. Durable, molded frame. Easy to read.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable level vial is impact resistant. Lightweight construction reduces line sag. Unrestricted hooks allows for easy movement on line. Used for masonry, landscape and sheet metal work. Model 595 features "Multi-Pitch" vial reads slope in 1/8" increments.
|
Heavy duty brass flush mounted thumbscrews. Used for repeat angle cuts for stairs and rafters. Attaches to all standard framing and carpenter squares.
|
Lightweight, contour grip, Hi-Viz orange case is easy to find and fits comfortably in hand. Slide lock design allows for easy control of tape blade, wide base helps keep tape standing upright, removable belt clip and easy-to-read yellow clad blade (not replaceable).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located.
|
High impact frame is non-conductive and non-corrosive with V-groove edge fits on pipe and conduit. Magnetic edge holds to ferrous metal surfaces (model 7500M). High visibility on job site (models 7500-ORANGE).
|
Manufactured of high-grade, tempered aluminum and silver anodized for long life. Graduations are screen-printed on one side with black, thermal-bonded epoxy ink. Graduations-1/8'', 1/16''.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Stainless steel with depth gauge pocket clip. 32nds and 64ths on one side, decimal equivalents on reverse. 15/32" wide.
|
Lightweight construction minimizes line sag. Unbendable open hooks allow level to slide freely. Pocket clip will guard tool against loss.
|
High-impact body with V-Groove edge that fits on pipe and conduit and durable acrylic vial reads level. Strong magnetic pickup tip and metal pocket clip.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Trim and lightweight metallic colored ABS case with durable key ring for convenience. Yellow, blade lacquer-coated for added rust protection, slide lock keeps blade extended as needed.
|
High impact frame is non-conductive and non-corrosive with V-groove edge fits on pipe and conduit. Magnetic edge holds to ferrous metal surfaces (model 7500M). High visibility on job site (models 7500-ORANGE).
|
For locating and transferring any angle from 0 degree to 360 degrees. Heavy duty adjustable stainless steel blade will not rust or corrode, a recessed grip in the handle. Easy-to-use wing nut for positive blade lock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, durable aluminum hexagonal body construction reduces line sag. Unrestricted hooks allow for easy movement. Used for masonry, landscape and sheet metal work.
|
Functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed Square, but is constructed of lightweight high-impact composite. Center line guide for locating center of round stock, bulit in block level that is easy to read from all angles, and a beveled edge for ease of reading.
|
Aluminum construction is lightweight and durable with flat base for surface leveling. Special hang hooks grip line which enables level to slide freely for positioning; 360 degree vial for easy readability.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed Square, but is constructed of lightweight high-impact composite. Center line guide for locating center of round stock, bulit in block level that is easy to read from all angles, and a beveled edge for ease of reading.
|
Made from brass-plated steel with a hardened-steel pin. The Compass has a jaw capacity of 8" in diameter and a full-length, hardened steel pin for scribing and stability. Wing nut adjustment up to 8". Used for marking contours and circles. Pencil not included.
|
Durable, lightweight "Structo-Cast" high-impact molded frame; permanent molded graduations for quick and easy measurements; thick edge is useful as a saw guide. Fluorescent orange color is easy to see.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy attachment to any rafter square. Use for angle cuts on rafters, or stair stringers. Can also be used as security stops on window or door metal channels.
|
Durable molded body with rugged acrylic vials read plumb and level simultaneously. Reflective backing increases vial visibility. Rubber strap allows hands free use quickly attaches to any post, pole or stringer.
|
Easy to read vials. Durable open hooks to slide on the line. Aluminum construction. Line level allows you to level and layout string and can be used on chalk reels to snap a level line.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High-impact ABS; top-reading feature allows visibility from above; tinted 360 degree vials for readability; high visibility orange body.
|
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
|
Heavy duty stainless steel blade will not rust or corrode. "Structo-Cast" handle is durable and light weight; 1/8" increments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A practical tool for measuring and duplicating difficult angles where a standard protractor or t-bevel cannot fit. The Protractor works on outside, inside and sloped angles from 0 to 165 degrees. The four-piece design adds additional versatility for measuring particularly difficult angles. Fine black graduations from 0 degree to 80 degrees in opposite directions. Brass lock nut.
|
Non pressure sensitive vinyl. Yellow tape with (WET PAINT) black lettering; 3" wide, 3 mm thickness.
|
High impact, high-visibility yellow case stands, High-contrast blade for easy readability with a 7' standout.
|
|
|
