|
|
|
|
|
|
|
|
|
|
|
Billy Penn Gutter Ferrule, 5 in Length, Suitable For Use With: K Style System, Aluminum, Mill
|
Billy Penn Gutter Ferrule, 5 in Length, Suitable For Use With: K Style System, Steel, Galvanized
|
Used to support DuraSpout downspout at either the offset elbow, coupler, or discharge spout. Never needs painting. Will not rust, rot or chip.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to support DuraSpout downspout at either the offset elbow, coupler, or discharge spout. Never needs painting. Will not rust, rot or chip.
|
Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Aluminum, Brown, Used to Hold Downspouts in Place
|
Amerimax Downspout Band, Suitable For Use With: 2 X 3 in and 3 X 4 in Downspouts, Aluminum, White, Used to Hold Downspouts in Place
|
|
|
|
|
|
|
|
|
|
|
|
|
To support downspout at either the offset elbow coupler or discharge spout. (Estimated 70 pieces per 1000' of gutter)
|
Used to support DuraSpout downspout at either the offset elbow, coupler, or discharge spout. Never needs painting. Will not rust, rot or chip.
|
Used where fascia board does not exist or is not vertical. Tang nailed under shingles then screwed to support brackets and slip joints. Front hinge snapped over button on part No.RW105 and part No.RW106.
|
|
|
|
|
|
|
|
|
|
|
|
|
To support downspout at either the offset elbow coupler or discharge spout. (Estimated 70 pieces per 1000' of gutter)
|
Billy Penn Outlet Tube, Type K, 2 in Width X 3 in Depth, Suitable For Use With: Gutter System, Aluminum, Enamel Coated
|
Amerimax Gutter End Cap, Right Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown
|
|
|
|
|
|
|
|
|
|
|
|
|
Amerimax Gutter End Cap, Left Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, Brown
|
Amerimax Gutter End Cap, Right Hand, 28 ga Thickness, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized
|
Amerimax Gutter End Cap, Right Hand, Suitable For Use With: 5 in K Style Gutter System, Aluminum, White
|
|
|
|
|
|
|
|
|
|
|
|
|
Amerimax Gutter End Cap, Left End, 5 in Length, Suitable For Use With: Left End of Gutter Run, Aluminum, White
|
Amerimax Gutter End Cap, Left Hand, 28 ga Thickness, Suitable For Use With: 5 in K Style Gutter System, Steel, Galvanized
|
Includes 1/4" hex head screw, which is driven into the fascia board after placing the front of the hanger under the front lip of the gutter. Screws included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Screws included.
|
Connects two lengths of downspout.
|
Used with Repla K system or as a replacement for metal. Used where the downspout changes in any direction. Turns 112 degrees for offsets and discharge spouts.
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects two lengths of downspout.
|
Used with a B-style Elbow to create an offset on side of house.
|
Amerimax Gutter Elbow, Front, Side, Flexible, Amerimax, 8 - 18 in Extended Length, Suitable For Use With: 2 X 3 in K-Style Downspout, 4 in and 5 in Gutters, Vinyl, White, Used to Connect Gutter or Drainpipe to Downspout
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable, flexible mesh can be easily unrolled, cut to length with scissors and installed in any type of gutter. Keeps leaves and debris from clogging gutters. Will not rust or corrode.
|
For end of gutter run.
|
Used where the square downspout changes in any direction. Estimated 100 pieces per 1000' of gutter.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used where the square downspout changes in any direction. Estimated 100 pieces per 1000' of gutter.
|
For end of gutter run.
|
For end of gutter run.
|
|